Small Rectangular Wall Panelling - Short

Open rectangular readymade wall panels. These premade Shaker style panels are designed to be "stacked" one above the other to allow it to be taken to any height. The breakdown of the panelling into numerous rectangles presents a very adaptable template and can be used just under the dado, up to the picture rail or to panel entire walls.

​A useful shortcut to create period style panelling in your reception rooms that would otherwise be much more time consuming to create. ​They are made from moisture resistant MDF.

No back panel is supplied with this product so the wall behind will show through. If your plastered walls aren't perfectly flat don't worry - you can apply thin 6mm mdf on the wall before attaching the panels to give a perfect finish.

Each open backed panel is 800mm high and 600mm wide.

Price is per open backed panel.

Dado, skirting and edging sold separately.

The panels with a perforated design (we call this Open Backed) require a reasonably good condition surface as this will still be seen where there square/rectangular cut outs. However this allows the panels to be “handed” so that installation is much easier (and cheaper!) than using a solid backed system. It also means that the panelling encroaches less into your room space. If the wall surface is not ideal it can always be lined first with a 6mm sheet of MDF glued to the wall and then our panels can be applied to this, but often a bit of surface filler and, of course, the eggshell paint finish will normally suffice.